What the QS138 90H is
The QS138 90H is the longer, more powerful version of QSMOTOR’s QS138 mid-drive motor. The “90H” refers to its 90mm magnet height, compared with 70mm on the QS138 70H. The extra length gives more torque and continuous power, which suits full-size dirt bike conversions and heavier riders. Fast E can supply the QS138 90H on its own or as part of a matched motor, controller and custom battery build.
QSMOTOR’s published specifications (90H V3)
| Spec | QS138 90H V3 |
|---|---|
| Motor type | PMSM, inner rotor, internal gears |
| Magnet height | 90mm, 5 pole pairs |
| Internal gear ratio | 1:2.35 |
| Rated power | 4000W |
| Peak power | 13kW |
| Rated voltage | 72V DC |
| Max no-load speed | 4,800rpm; up to 7,000rpm with flux weakening |
| Max torque | 150Nm or more |
| Max efficiency | 93% or more |
| Current | Rated 60A, limit under 200A |
| Weight | 14.5kg |
| Sensor, cooling, sealing | Hall; air cooled; IP67 |
These figures come from QSMOTOR’s own 90H V3 listing. Non-geared versions and reseller listings publish different numbers (for example peak power of 13.5kW and lower motor-shaft torque, because there’s no reduction gear).
Published figures for QS motors differ between QSMOTOR’s own pages and resellers, and between versions (for example V2 and the geared V3). We’ll confirm the exact version and specifications in your quote.
Who it suits
- Full-size frames such as 250 and 450-class motocross and enduro bikes.
- Heavier riders, or riders who want strong torque for hills and sand.
- Builds where continuous power matters more than the lightest possible weight.
It’s heavier and longer than the 70H, so frame space has to be checked. See QS138 70H vs 90H.
Controller and battery
To get the most from a 90H, the controller and battery need to supply enough current. Fardriver’s ND72680 and larger ND-series controllers are common pairings. Fardriver describes its 680A ND series as matching well with QS motors. We’ll spec a custom Fast E battery, built to deliver the current safely. See Fardriver controllers, conversion batteries, YZ450F conversion batteries and CRF250 conversion batteries.
Fitting and setup
We mount, wire and set up the motor and controller, including the controller’s self-learning routine to match it to the motor, current limits and throttle response. See our e-moto conversions page, or the complete QS138 conversion kit.
What to send us for a quote
Tell us the donor bike’s make, model and year, whether the engine is still in it, your weight, and how and where you ride. Photos of the frame from both sides, with measurements of the space between the frame rails, help us confirm the 90H will fit. Let us know if you already have any parts, such as a controller or battery, so we can check they’ll work with the motor.
Frequently asked questions
How powerful is the QS138 90H?
QSMOTOR lists the 90H V3 at 4000W rated and 13kW peak at 72V. Real output depends on the controller and battery.
Is the 90H too heavy for a small bike?
At about 14.5kg, it suits full-size frames better. For smaller bikes, the 70H is usually the better choice.
Does the 90H need a gearbox?
The V3 has internal reduction gears, so it drives a chain sprocket directly.
Can you supply a complete 90H kit?
Yes, with a matched controller and custom battery. Start a quote with your donor bike details.
Start a quote with the chat button, bottom-right. Prefer email or phone? Head to our contact page.
