Custom marine lithium battery

Custom marine lithium battery packs for boats, jet skis, trolling motors and eFoils

A custom marine lithium battery is built around your boat or board, not a stock box size. We build lithium packs to spec for trolling motors, electric outboards, electric jet skis, eFoil boards, jet boards and boat house power. First, you tell us the voltage, the current your motor draws and the space you have. Then we spec a pack to suit and quote it through the chat.

Custom marine lithium battery builds, 12V to 48V and up

Most boats run 12V, 24V or 36V systems, while many electric drives run at 48V or higher. So we start with your system voltage and build from there. For example, a 36V trolling motor can run from one pack instead of three 12V batteries in series.

  • 12V packs for house loads, electronics and small trolling motors
  • 24V and 36V packs for trolling motors
  • 48V packs for electric outboards and drive systems
  • Higher-voltage packs built to suit your motor controller
  • Packs shaped to odd hatches, trays and battery boxes

Most of what we build is high-current packs for electric motorbikes. Because of that, the same approach carries over to motors that draw steady current for long periods. See our high-voltage battery builds for examples.

A 36V trolling motor lithium battery, built to the space

A 36V trolling motor lithium battery is one of the packs customers ask us about most. Trolling motors pull steady current for hours. As a result, the pack and BMS need sizing to the motor’s continuous draw, not just its voltage. We can also build 24V trolling motor packs, and we can mention 48V trolling where that is the motor’s voltage.

A 36V trolling motor can run from one pack instead of three 12V batteries in series. Many boats have odd-shaped hatches, consoles and trays, so a catalogue box often will not sit well. Instead, we build the pack to the space you have. Tell us the motor’s make and model, its voltage, and how long you usually fish for. Also, measure the battery space and send photos.

Customers often ask about a 100Ah pack for trolling. The right size depends on the motor and how long you run it. Send us those details, and we’ll suggest a capacity. This is not a 100Ah catalogue. It’s a pack built to the space, quoted to your motor.

48V electric outboard battery packs

Electric outboards range from small tender motors to larger drives. Some motor makers supply their own batteries, while others let you choose the pack. If yours runs from a separate battery, a 48V electric outboard battery is often the pack people ask us to build. Send us the motor’s model, input voltage and peak current, and the size of the battery box. We check that a custom pack suits the motor before we quote. That way, the marine lithium battery matches the drive you already own.

What size battery for an electric outboard depends on the motor and the hours you want on the water. Tell us those details, and we’ll suggest a capacity. We don’t publish a set of 48V SKU sizes. For 24V and 48V house systems as well as boats, see our custom 24V and 48V lithium packs page.

eFoil battery replacement, including Lift and Waydoo

eFoil boards and electric jet boards carry the battery in a box inside the board. Because of this, space and weight are tight. eFoil battery replacement is a common request. Customers ask us about Lift eFoil battery replacement and Waydoo eFoil battery replacement. We are not a dealer for those brands. However, we can quote a replacement or custom pack built to the space in the board, if we can match the voltage, capacity and connectors.

Do you want a spare or a replacement pack? Then send us the board’s make and model, plus the original battery’s voltage and capacity. Also, measure the battery box and send photos of the connectors. That way we can tell you if we can build a pack to suit, and match the plugs. We confirm this before we quote.

Electric jet ski batteries

Electric jet skis need a lot of power from a pack that fits a tight hull. So we build each jet ski pack around your motor controller, the space in the hull and the ride time you want. Want a spare, a replacement or more range? Send us the make and model, plus the voltage and capacity of the original battery. Also send photos of the battery bay and the connectors. Then we can tell you if a pack will fit, and quote it through the chat. Converting a petrol ski instead? See our electric jet ski conversion page.

Kayaks and small electric craft

Kayak motors and small electric boats all need different packs. Some need low weight, whereas others need long run time. Either way, we size the pack to your motor and the hours you want on the water. Also, tell us how you charge between trips, so the pack suits your routine.

Marine lithium battery packs for house and auxiliary power

A house battery runs lights, fridges, pumps, sounders and other electronics. Instead of a stock box size, a custom marine lithium battery can be shaped to fill the space you have. We build our 24V and 48V house and marine packs with LiFePO4 cells. Running 24V or 48V house power? In that case, see our custom 24V and 48V lithium packs. For other shapes and voltages, see how we build a custom lithium battery pack.

BMS, monitoring and enclosure options

Every pack needs a battery management system (BMS) sized to your current. Our packs use an ANT smart Bluetooth BMS, so you can check voltage, current and temperature in the app. For more detail, see our ANT BMS guide.

Enclosures are options we build to suit the job. For example, we can discuss sealed cases, cable entries and terminals that match your wiring. Tell us where the battery sits and how much water and spray it sees. We’ll then suggest options for your build. Protecting the boat or jet ski too? Have a look at our jet ski and boat GPS tracker.

What to send us for a custom marine lithium battery

  1. Open the chat and pick Custom battery.
  2. Tell us the boat, board or motor, and its system voltage.
  3. Next, give us the continuous and peak current, plus how long you want it to run.
  4. Then send the length, width and height of the battery space, with photos.
  5. Also, tell us which charger you use now, if any.
  6. After that, we spec the build and come back with a quote.

We supply custom packs worldwide, with freight quoted per job through the chat.

FAQ

Can you build a marine lithium battery to replace my lead-acid batteries?

Often, yes. Tell us how your system is wired now and what it runs. Then we’ll spec a pack to suit.

Can you build a 36V trolling motor lithium battery?

Yes, we can build 36V packs. Send us the motor’s make and model, how long you usually fish for, and the space you have. We also build 24V trolling motor packs.

Can you make a replacement eFoil battery?

Send us the board’s make and model, the battery’s voltage and capacity, and the box size. We also need photos of the connectors. We check whether we can build one to suit before we quote. Customers ask us about Lift and Waydoo replacement packs; we are not a dealer for those brands.

Can you build a 48V electric outboard battery?

If your outboard runs from a separate battery, yes, we can often quote a 48V pack. Send the motor’s model, input voltage and peak current, plus the size of the battery box. We check that a custom pack suits the motor before we quote.

What chemistry do you use?

We build our 24V and 48V house and marine packs with LiFePO4 cells. For other builds, we confirm the chemistry in your quote.

Is there a warranty?

We confirm warranty details in your quote.

We supply custom packs worldwide, with freight quoted per job through the chat.

Ready to start? Tell us your motor and the space you have

Get a quote
Shopping Cart