Slim packs for tight spaces

Slimline lithium battery packs for tight spaces

A slimline lithium battery is a shallow pack, built to the space behind a seat, under a bed, in a drawer or against a canopy wall. Off-the-shelf slim packs come in a few fixed sizes. If that box will not sit where you need it, we can make a LiFePO4 pack to your measurements. Fast E builds each battery to spec and supplies it, with fitting at our Sunshine Coast workshop on request.

What is a slim pack?

It is a shallow battery, made to sit where a standard cube will not. Behind a seat, under a bed, in a drawer or against a canopy wall is often wide and flat, but not deep. Retail slim packs come in a few set sizes. If yours is a different length, width or height, a catalogue pack won’t sit there.

Our 12V and 24V packs use LiFePO4 cells. We shape the case to your measurements, and we place the terminals where your cables already run. Tell us what you run and how long you stay off-grid, and we’ll suggest a size.

Made to fit your space

Instead of cutting the van or canopy to suit a box, we shape the pack to your measurements. First, send the length, width and height, plus photos. Then we spec the pack from those numbers. We can also talk about sealed options and casings made for a fixed install.

  • Packs made to your length, width and height
  • Slim, low-profile shapes where the space is tight
  • Terminals placed where your cables already run
  • 12V packs, and 24V or 48V builds where the system needs them
  • No minimum order

Will a 200Ah pack fit?

200Ah is a size a lot of people ask for. It is a familiar capacity for a fridge, lights and charging. We can build around that in a shallow case. We can also go a bit larger, including around 230Ah, if the space allows it. The case still has to follow your measurements, so the capacity has to fit the length, width and height you have.

Tell us what you run and how you charge. We’ll suggest a size that suits the space you’ve got, rather than forcing a set 200Ah box into a space it will not fit. These packs do not include 240V output.

Fitting in a drawer or false floor

A 4WD drawer, drawer wing or false floor often leaves a shallow space that a standard cube will not sit in. Measure the length, width and height, and send photos of what sits around it. Then we can shape a slim pack to those measurements, with terminals placed where your cables already run.

This is just the pack, made to fit. It is not a complete drawer system or a portable battery box. The same approach can also suit a tight trailer space.

Fitting behind the seat

A pack behind a cab seat, or in a shallow seat base, is a common 4WD request. That includes tight spots such as the area behind a next-gen Ranger seat. Measure the space and note how the seat folds or slides. Then we shape the case and terminals to suit that layout.

An under-seat pack can sit in a shallow base in the same way. A long, low pack can also sit under a bed, when that is the space you have.

For van and camper builds, see our custom lithium caravan battery page. For ute canopies and tubs, see our canopy lithium battery page, and for a boat locker, see our custom marine lithium battery page.

When a stock pack won’t fit

Off-the-shelf slim packs come in a few fixed footprints. If the box is too long, too thick, or too tall, it will not sit in your space. The same is true if the terminals are on the wrong face for your cables. In that case, we build a slim pack to your length, width and height, and we place the terminals where you need them.

This is not a brand-versus-brand roundup, and we don’t publish other people’s prices or sizes as a catalogue. The honest test is simple. If a stock slim pack already fits and covers your loads, it may be enough. If it won’t fit, or you need a different capacity in that same shallow space, get a quote and we’ll make one to fit.

Choosing a size

A slim shape does not, by itself, tell you the right capacity. The right size depends on what you run, how you charge, and how many days you stay off-grid. For a clear method, see our guide to what size lithium battery for a caravan. If you’re replacing AGM or lead-acid batteries, see our AGM to lithium caravan upgrade page.

Most van and camper packs we build are 12V. Some motorhomes and big campers run 24V or 48V. We can also build a slim 24V pack when the space is shallow. For those systems, see our custom 24V and 48V lithium packs.

Charging from the alternator

Your pack has to suit the way you charge it. If you already have a DC-DC charger, tell us the model and the system voltage. Then we can quote a pack that matches that setup, with terminals placed for your cable runs.

If you need a DC-DC charger as well, we can quote that as an add-on. We do not sell a complete dual-battery kit from this page. We build the pack to match the charger you use.

Adding a solar blanket

A solar blanket can top the pack up in camp, when you are away from the vehicle charger. If you already have a solar blanket or a solar controller, tell us what you use. Then we can quote a pack that suits that charge source.

If you need a solar blanket as well, we can quote that as an add-on.

What to send us

  1. First, open the chat and pick Custom battery.
  2. Next, send the length, width and height of the space, plus photos.
  3. Then tell us the system voltage and your charger, solar controller and inverter.
  4. After that, list what you run, and how many days you like to stay off-grid.
  5. Finally, we spec the build and come back with a quote and turnaround.

We supply the pack, and also offer fitting at our Sunshine Coast workshop on request. For how we design a pack, see our custom lithium battery pack page.

FAQ

What is a slim pack?

It is a shallow battery, made to sit in a tight space. Off-the-shelf slim packs come in a few fixed footprints. If that box will not sit under a bed, behind a seat, in a drawer or against a canopy wall, we can make a LiFePO4 pack to your measurements.

Can a slim pack sit on its side, or mount vertically?

That depends on the case, the terminals and how you want the pack to sit. Tell us the orientation you need, and we’ll design the case and terminals for that layout. We confirm this in your quote, rather than claiming one orientation for every pack.

When is a standard box a better answer?

If a catalogue slim pack already fits your space, and it covers the capacity you need, a standard box can be enough. This page is for the other cases: an odd space, a capacity a set footprint won’t allow, or terminals that need to sit where your cables already run.

Do you build 12V and 24V slim packs?

Yes. Most caravan and camper packs we build are 12V LiFePO4. We can also build a 24V slim pack when the space is shallow and the system is 24V. For 24V and 48V systems, see our custom 24V and 48V packs page.

What chemistry do you use?

Our caravan, camper, canopy and house packs use LiFePO4 cells.

Does the pack include 240V output?

No. We build these packs for DC loads at 12V or 24V, and at 48V when the system needs it. They do not include 240V output.

Is there a warranty?

Warranty details are confirmed in your quote.

Also, we ship custom packs worldwide, with freight quoted to your country.

Ready to start? Send your space measurements

Get a quote
Shopping Cart